1
Hi, Guest!

  LOKASI :  bekasi - Indonesia

  AKTIVITAS :  17/10/2019

BAGIKAN :   

Bagikan :
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus [email protected] !
CV. ANDALAN PRIMA SEJAHTERA

HIOKI LUX HiTESTER 3423

Update Terakhir
:
09 / 07 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:
Air & Gas Analysis
Analyzer Disposable
Anemometer
Apparel
Autoclave (Sterilizer)
Bags
Balance
Ball Mills
Baths
Beakers
Bottles
Burets
Burners
Carts
Centrifuge
Chemical
Clamps and Support
Cleaning
Clinical
Climate Chamber
Color Measurement
Conductivity
Container
Crucibles
Cryogenics
Cylinders

Detail HIOKI LUX HiTESTER 3423

Digital illuminance meter with a

maximum display of 199,900 lx

Features

Capable of a broad range of measurements,

from low light levels to strong

light levels.

Permits remote measurement with the

sensor separated from the main unit.

Equipped with display hold and backlight

features.

Simple operation.

Includes analog output that can be used

to record results.

Analog output includes zero adjustment

function.

Specifications

Temperature

characteristics

Humidity

characteristics

Characteristics

regarding

intermittent light

Relative spectral

response characteristics

in the

visible spectrum

Receptor element

Standards applying

Operating

temperature and

humidity range

Analog output

Power supply

Continuous

operating time

Dimensions and

mass

Accessories

Deviation from value measured at 23˚C between - 10˚C

and 40˚C: ±3%

Deviation from value measured in an environment with a

temperature and humidity of 23˚C and 45% to 75% RH

when unit is left in an 85% to 95% RH environment for three

hours and then is returned to the original environ-ment: ±3%

Deviation in value when subjected to intermittent light

for 1/2 cycle at a frequency of 100 Hz or 120 Hz : ±2%

Deviation from spectral luminous efficiency : 8% or less

Silicon photodiobe

Safety: EN 61010 Pollution degree 2

EMC: EN 61326

-10˚C to 40˚C, 80% RH or less, with no condensation

DC 200m V f.s. ± 2.5% f.s. (versus the display value)

Rated supply voltage 1.5 VDC×2, two R6P manganese

batteries or two LR6 alkaline batteries

Approx. 25 hours

74mm (W) × 170mm (H) × 30mm (D) (excluding protruding

parts), approximately 310 g (including batteries)

Sensor cap, Carrying case 9376, R6P manganese battery

× 2, Instruction manual

Options

Connecting cable 9436 2m (with case)

Output cord 9094

By using the connecting cable 9436 (with

case), it is possible to take measurements with

the sensor separated from the main unit. (The

connecting cable 9436 is sold separately.)

relative luminous

relative spectral responsivity

wave length (nm)

spectral luminous efficiency

3243

Display

Display

operation

Measuring

ranges

Overflow

indication

Accuracy

Angled incident light

characteristics

(deviation from cosine

characteristics)

Response characteristics

in ultraviolet

and infrared

spectrums

Fatigue characteristics

LCD 3 1/2 Maximum:"1999"

However, in the 20,000 lx range, the maximum is

"19,990", and in the 200,000 lx range, the maximum is

"199,900".

Battery low ( ) display indicator

EL backlight function

20, 200, and 2000 lx ranges :1-count step

20,000 lx range :10-count steps

200,000 lx range :100-count steps

20/200/2,000/20,000/200,000 lx

Auto range / manual switching

"OF" is displayed

± 4% rdg. ± 1 dgt. (23˚C ± 5˚C)

Angle of 10˚: ±1%

30˚: ±2%

50˚: ±6%

60˚: ±7%

80˚: ±25%

Response to ultraviolet and infrared radiation: less than

1%

Change in value one minute and ten minutes after light

strikes sensor: ±1%

B

Response time Auto range :5 seconds or less

Manual range :2 seconds or less

 

Tampilkan Lebih Banyak
cv. andalan prima sejahtera
cv. andalan prima sejahtera

CV. ANDALAN PRIMA SEJAHTERA

PREMIUM GOLD 10 Tahun
Jl. Muhtar Tabrani Perum Bintang Metropol Blok A-7/16 Bekasi Utara, bekasi - Indonesia
Indonesia 17122
bekasi - Indonesia
17 / 10 / 2019
Hubungi Kami

Detail HIOKI LUX HiTESTER 3423

Digital illuminance meter with a

maximum display of 199,900 lx

Features

Capable of a broad range of measurements,

from low light levels to strong

light levels.

Permits remote measurement with the

sensor separated from the main unit.

Equipped with display hold and backlight

features.

Simple operation.

Includes analog output that can be used

to record results.

Analog output includes zero adjustment

function.

Specifications

Temperature

characteristics

Humidity

characteristics

Characteristics

regarding

intermittent light

Relative spectral

response characteristics

in the

visible spectrum

Receptor element

Standards applying

Operating

temperature and

humidity range

Analog output

Power supply

Continuous

operating time

Dimensions and

mass

Accessories

Deviation from value measured at 23˚C between - 10˚C

and 40˚C: ±3%

Deviation from value measured in an environment with a

temperature and humidity of 23˚C and 45% to 75% RH

when unit is left in an 85% to 95% RH environment for three

hours and then is returned to the original environ-ment: ±3%

Deviation in value when subjected to intermittent light

for 1/2 cycle at a frequency of 100 Hz or 120 Hz : ±2%

Deviation from spectral luminous efficiency : 8% or less

Silicon photodiobe

Safety: EN 61010 Pollution degree 2

EMC: EN 61326

-10˚C to 40˚C, 80% RH or less, with no condensation

DC 200m V f.s. ± 2.5% f.s. (versus the display value)

Rated supply voltage 1.5 VDC×2, two R6P manganese

batteries or two LR6 alkaline batteries

Approx. 25 hours

74mm (W) × 170mm (H) × 30mm (D) (excluding protruding

parts), approximately 310 g (including batteries)

Sensor cap, Carrying case 9376, R6P manganese battery

× 2, Instruction manual

Options

Connecting cable 9436 2m (with case)

Output cord 9094

By using the connecting cable 9436 (with

case), it is possible to take measurements with

the sensor separated from the main unit. (The

connecting cable 9436 is sold separately.)

relative luminous

relative spectral responsivity

wave length (nm)

spectral luminous efficiency

3243

Display

Display

operation

Measuring

ranges

Overflow

indication

Accuracy

Angled incident light

characteristics

(deviation from cosine

characteristics)

Response characteristics

in ultraviolet

and infrared

spectrums

Fatigue characteristics

LCD 3 1/2 Maximum:"1999"

However, in the 20,000 lx range, the maximum is

"19,990", and in the 200,000 lx range, the maximum is

"199,900".

Battery low ( ) display indicator

EL backlight function

20, 200, and 2000 lx ranges :1-count step

20,000 lx range :10-count steps

200,000 lx range :100-count steps

20/200/2,000/20,000/200,000 lx

Auto range / manual switching

"OF" is displayed

± 4% rdg. ± 1 dgt. (23˚C ± 5˚C)

Angle of 10˚: ±1%

30˚: ±2%

50˚: ±6%

60˚: ±7%

80˚: ±25%

Response to ultraviolet and infrared radiation: less than

1%

Change in value one minute and ten minutes after light

strikes sensor: ±1%

B

Response time Auto range :5 seconds or less

Manual range :2 seconds or less

 

Tampilkan Lebih Banyak