1
Hi, Guest!

  LOKASI :  bekasi - Indonesia

  AKTIVITAS :  17/10/2019

BAGIKAN :   

Bagikan :
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus [email protected] !
CV. ANDALAN PRIMA SEJAHTERA

Jenco PH In-line Transmitter 692

Update Terakhir
:
30 / 08 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:
Air & Gas Analysis
Analyzer Disposable
Anemometer
Apparel
Autoclave (Sterilizer)
Bags
Balance
Ball Mills
Baths
Beakers
Bottles
Burets
Burners
Carts
Centrifuge
Chemical
Clamps and Support
Cleaning
Clinical
Climate Chamber
Color Measurement
Conductivity
Container
Crucibles
Cryogenics
Cylinders

Detail Jenco PH In-line Transmitter 692

Description 1/ 8 DIN panel mount pH transmitter with 4-20 mA output and calibration by potentiometers. ATC temperature control uses a Pt-100 or simulation resistor. Features a large LCD display and uses a BNC input and spade lug screw type connector block All solid state design ATC Low power consumption design, reduced internal heating thus increased reliability 0.56 high LCD display Isolated 4 to 20 mA current output High stability and fast response 1/ 8 DIN standard aluminum case Easy to install Heat cycled 100 hours before shipment Specifications Range Resolution Accuracy pH 0.00 to 14.00 pH 0.01pH ± 0.02 pH ± 1 LSD General Input impedance: Greater than 10 to 12th ohms Temp. compensation: Auto 0 to 100 ° C Current output: Isolated 4 to 20 mA Current accuracy: 0.1% Max transmitter load: 600 ohms Isolated voltage: 500 VDC min Display: 0.56 high LCD Power source: 115/ 230 VAC ± 10% , 50/ 60 hz Dimensions: 96 mm x 48mm x 152mm Weight: 0.58 kgs Temperature sensor: Pt-100
Tampilkan Lebih Banyak
cv. andalan prima sejahtera
cv. andalan prima sejahtera

CV. ANDALAN PRIMA SEJAHTERA

PREMIUM GOLD 10 Tahun
Jl. Muhtar Tabrani Perum Bintang Metropol Blok A-7/16 Bekasi Utara, bekasi - Indonesia
Indonesia 17122
bekasi - Indonesia
17 / 10 / 2019
Hubungi Kami

Detail Jenco PH In-line Transmitter 692

Description 1/ 8 DIN panel mount pH transmitter with 4-20 mA output and calibration by potentiometers. ATC temperature control uses a Pt-100 or simulation resistor. Features a large LCD display and uses a BNC input and spade lug screw type connector block All solid state design ATC Low power consumption design, reduced internal heating thus increased reliability 0.56 high LCD display Isolated 4 to 20 mA current output High stability and fast response 1/ 8 DIN standard aluminum case Easy to install Heat cycled 100 hours before shipment Specifications Range Resolution Accuracy pH 0.00 to 14.00 pH 0.01pH ± 0.02 pH ± 1 LSD General Input impedance: Greater than 10 to 12th ohms Temp. compensation: Auto 0 to 100 ° C Current output: Isolated 4 to 20 mA Current accuracy: 0.1% Max transmitter load: 600 ohms Isolated voltage: 500 VDC min Display: 0.56 high LCD Power source: 115/ 230 VAC ± 10% , 50/ 60 hz Dimensions: 96 mm x 48mm x 152mm Weight: 0.58 kgs Temperature sensor: Pt-100
Tampilkan Lebih Banyak