1
Hi, Guest!

  LOKASI :  bekasi - Indonesia

  AKTIVITAS :  17/10/2019

BAGIKAN :   

Bagikan :
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus [email protected] !
CV. ANDALAN PRIMA SEJAHTERA

Jenco PH, ORP, Temperature In-line Analyzer 6311

Update Terakhir
:
30 / 08 / 2019
Min. Pembelian
:
1 Unit
Harga
CALL
Bagikan
:
Air & Gas Analysis
Analyzer Disposable
Anemometer
Apparel
Autoclave (Sterilizer)
Bags
Balance
Ball Mills
Baths
Beakers
Bottles
Burets
Burners
Carts
Centrifuge
Chemical
Clamps and Support
Cleaning
Clinical
Climate Chamber
Color Measurement
Conductivity
Container
Crucibles
Cryogenics
Cylinders

Detail Jenco PH, ORP, Temperature In-line Analyzer 6311

Description pH & ORP analyzer, 1/ 4 DIN panel mount IP-65 case. Features 4 fully programmable relays for pH or ORP and one for wash. RS-485 interface, password protected with individual ID' s. 4-20 mA analog output is fully programmable, assignable & reversible. Tinned lead connectors. CE Approved . Ph/ ORP/ temp. measurement & control Display pH electrode efficiency User selectable ATC element: 3k balco, 10k, and pt-1000 Reversible & isolated 4~ 20ma output RS-485 output Bumpless calibration Graphic LCD dispaly, 128 x 64with backlight Membrane switch with audio feedback Auto temp. compensation High 50/ 60 hz noise rejection Pipe/ wall/ panel mounting 1/ 4 DIN watertight enclosure One programmable relay for temp. CE approved Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output Specifications Range Resolution Accuracy pH -2.00 to 16.00 0.01pH ± 0.1 % pH ± 1 LSD ORP( Absolute) -2500 to 2500mV 1mV ± 0.1 % mV ORP( Relative) -6499 to 6499mV 1mV ± 0.1 % mV Temp. -10.0 to 120 ° C 0.1° C ± 0.3° C pH Temperature compensation range: -10.0 to 120.0 ° C Buffer recognition: 4.01, 7, 10.01 / 4.00, 6.86, 9.18 Buffer temperature range: 0 to 60.0 ° C Electrode slope compensation: ± 30% of ideal slope Electrode offset compensation: ± 100 mV Input impedance: Greater than 10 exp( 13) ohms Calibration auto end point sensing: Yes Output Relays pH or ORP: 4programmable for pH or orp Temperature: 1programmable, manual relay Control type: On/ off Relay output ( resistive load only) : 5amps at 115 VAC 2.5 amps at 230 VAC Relay set point hysteresis: User programmable Current Output Type: Isolated 4 to 20 mA Range: Selectable zero, & span Accuracy: ± 0.02mA Isolated voltage: 500 VDC Maximum load: 500 w General ATC sensor: 3k balco, 10k, and pt-1000, selectable Security protection: 4digit password Keypad: Audio feedbackup Communication: RS-485 Pre-amplifier voltage: ± 5 VDC, 20mA max output Power source: 115/ 230 VAC, 50/ 60hz Dimensions: 1/ 4 DIN, depth 148mm Weight: 940 gm
Tampilkan Lebih Banyak
cv. andalan prima sejahtera
cv. andalan prima sejahtera

CV. ANDALAN PRIMA SEJAHTERA

PREMIUM GOLD 10 Tahun
Jl. Muhtar Tabrani Perum Bintang Metropol Blok A-7/16 Bekasi Utara, bekasi - Indonesia
Indonesia 17122
bekasi - Indonesia
17 / 10 / 2019
Hubungi Kami

Detail Jenco PH, ORP, Temperature In-line Analyzer 6311

Description pH & ORP analyzer, 1/ 4 DIN panel mount IP-65 case. Features 4 fully programmable relays for pH or ORP and one for wash. RS-485 interface, password protected with individual ID' s. 4-20 mA analog output is fully programmable, assignable & reversible. Tinned lead connectors. CE Approved . Ph/ ORP/ temp. measurement & control Display pH electrode efficiency User selectable ATC element: 3k balco, 10k, and pt-1000 Reversible & isolated 4~ 20ma output RS-485 output Bumpless calibration Graphic LCD dispaly, 128 x 64with backlight Membrane switch with audio feedback Auto temp. compensation High 50/ 60 hz noise rejection Pipe/ wall/ panel mounting 1/ 4 DIN watertight enclosure One programmable relay for temp. CE approved Programmable linear/ ORP current output or programmable linear/ anti-logarithmic current output Specifications Range Resolution Accuracy pH -2.00 to 16.00 0.01pH ± 0.1 % pH ± 1 LSD ORP( Absolute) -2500 to 2500mV 1mV ± 0.1 % mV ORP( Relative) -6499 to 6499mV 1mV ± 0.1 % mV Temp. -10.0 to 120 ° C 0.1° C ± 0.3° C pH Temperature compensation range: -10.0 to 120.0 ° C Buffer recognition: 4.01, 7, 10.01 / 4.00, 6.86, 9.18 Buffer temperature range: 0 to 60.0 ° C Electrode slope compensation: ± 30% of ideal slope Electrode offset compensation: ± 100 mV Input impedance: Greater than 10 exp( 13) ohms Calibration auto end point sensing: Yes Output Relays pH or ORP: 4programmable for pH or orp Temperature: 1programmable, manual relay Control type: On/ off Relay output ( resistive load only) : 5amps at 115 VAC 2.5 amps at 230 VAC Relay set point hysteresis: User programmable Current Output Type: Isolated 4 to 20 mA Range: Selectable zero, & span Accuracy: ± 0.02mA Isolated voltage: 500 VDC Maximum load: 500 w General ATC sensor: 3k balco, 10k, and pt-1000, selectable Security protection: 4digit password Keypad: Audio feedbackup Communication: RS-485 Pre-amplifier voltage: ± 5 VDC, 20mA max output Power source: 115/ 230 VAC, 50/ 60hz Dimensions: 1/ 4 DIN, depth 148mm Weight: 940 gm
Tampilkan Lebih Banyak